Repiping a house is a huge project. Repiping requires a significant investment, and homeowners need to be sure that it is the best solution for their situation.
While modern plumbing pipes are designed to last, there is no set timetable for replacing the pipes in a home. It is also important to note that pipes undergo a lot of wear and tear each day. If a homeowner detects any issues, there is a chance the house needs to be repiped.
In this situation, it is good to call the professionals to learn more about Drain System Re-piping.
The Pipes are Unsafe or Old
While the lifespan of the pipes in a home will vary because of several factors, including wear and tear, if they are in a cold climate, etc., a good rule of thumb is to have them replaced once they reach the 50-year mark. Also, unsafe materials, such as lead pipes, need to be removed and replaced right away. It is also worth noting that polybutylene pipes often leak, which means they need to be checked several times per year if they are not replaced. This is also a good time to learn about Repiping Options.
If someone has a home that was built in the 1970s and the original pipes are still in place, those pipes are halfway to the point of being antique. In many cases, those pipes are likely made of galvanized steel. If that is the case, there is a much higher chance that corrosion will occur than with newer pipes.
Also, if the pipes are clanging, rattling, clacking, or making other noises that are not normal, it is a red flag that there is something more serious going on. At this point, looking into repiping for drainage, drainpipes, and systems to minimize future issues.
Making repairs to a corroded pipe is not a good idea. This is because it is necessary to consider the structural integrity of the pipes in question. If the pipes are from the 1970s or earlier, they are likely made of galvanized steel (as mentioned above), it is best to repipe the home now before more serious issues occur.
If a homeowner’s shower, dishwasher, or washing machine is dealing with lower-than-usual pressure, it is a sign that repiping may be necessary.
This is particularly common after coming home from vacation or if the water has not been turned on for a while. If this only occurs when the hot water is turned on, it could be because of a corroded water heater, not the plumbing pipes in the home.
Copper pipes installed beneath a cement slab foundation can cause slab leaks as a result of ground shifts, seismic activity, and improper installation. Homes in areas with a lot of seismic activity have a particularly high chance of a slab leak developing and should be on the lookout for telltale signs that this is happening.
Don’t Wait to Call for Plumbing Solutions
If a home’s plumbing system is not working properly, there could be several reasons this has happened. Regardless of what the reason may be, it is never a good idea to ignore the issue. Calling for help from a plumber can ensure that the right repairs are made and that repiping is done, if needed, for the home or building. Keep this in mind to achieve the best results for a home’s plumbing system.
